View DF13C-11S-125V_416702.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1.25mm Pitch Miniature Crimping Connector
DF13 Series
Type DIP
Mounting Type
Mounting Height 5.3mm
Straight Type
SMT
5.8mm
Right Angle Type
DIP 3.6mm SMT
sFeatures
1. Miniature Size
Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type) (For DIP type, the mounting height is to 5.3mm to the straight and 3.6mm at the right angle)
Correspond to Automatic Mounting
Secure the automatic plain area for the absorption type automatic mounting machine.
Straight Type
Absorption area
2. Multi-contact
The double row type achieves the multi-contact up to 40 contacts, and secures 30% higher density in the mounting area, compared with the single row type.
3. Correspond to Automatic Mounting
The header provides the grade with the vacuum absorption area, and secures automatic mounting by the embossed tape packaging. In addition, the tube packaging can be selected.
4. Integral Basic Function Despite Miniature Size
The header is designed in a scoop-proof box structure, and completely prevents mis-insertion. In addition, the surface mounting (SMT) header is equipped with the metal fitting to prevent solder peeling.
Right Angle Type
Metal fitting Absorption area
sApplications
Note PC, mobile terminal, miniature type business equipment, and other various consumer equipment, including video camera
Figure 1
B183
sProduct Specifications
Rating Current rating 1A Operating Temperature Range: -35 to +85c (Note 1) Storage Temperature Range: -10 to +60c (Note 2) Storage Moisture Range: 40 to 70% Condition 100V DC 500V AC/1 minute 100mA Measured at the square steel pin of 0.350.002mm Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95% (-55c: 30 minutes 5 to 35c: 10 minutes 85c: 30 minutes 5 to 35c: 10 minutes) 5 cycles Tin plating: 30 cycles Gold plating: 50 cycles 9.Resistance to Soldering heat No deformation of components affecting performance. Flow: 250c for 10 seconds Manual soldering: 300c for 3 seconds Reflow: At the recommended temperature profile Manual soldering: 300c for 3 seconds
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Voltage rating 150V AC Operating Moisture Range: 40 to 80% Specification 500M ohms min. No flashover or insulation breakdown. 30m ohms max. No electrical discontinuity of 1s or more Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min.
(Note 2)
Item 1.Insulation Resistance 2.Withstanding voltage 3.Contact Resistance 5.Vibration 7.Temperature Cycle
4.Single Insertion/Extraction Force 0.3N (30gf) min., 3N (300gf) max. 6.Humidity (Steady state) Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min. 8.Durability (Mating/un-mating) Contact resistance: 30m ohms max.
sMaterial
Product Crimping Socket Crimping Contact for Socket Pin Header (Through hole) Part Insulator Contact Insulator Contact Insulator Pin Header (SMT) Contact Metal Fitting Material Polyamide Phosphor copper Polyamide Brass Polyamide Brass Phosphor copper Finish Beige Tin plated or gold plated Beige Tin plated Beige Tin plated or gold plated Tin plated Remarks UL94V-0 --UL94V-0 --UL94V-0 -----
sOrdering Information
qConnector
DF13
q : DF13 : Blank: With boss A: Without boss
# - * S - 1.25 C
w e r t y t Contact Pitch: 1.25mm y Contact Type C : Crimping socket / DSA : Straight through hole DS : Right angle through hole / V : Straight SMT H : Right angle SMT
q Series Name w Style Symbol V Type
e Number of Contacts r Single row: 2 to 12, 14, 15 r Double row: 10, 20, 30, 40
B: Without boss, embossed tape type r Connector Type C: Without boss, embossed tape type t S: Single row socket / P: Single row pin header t DS: Double row socket / DP: Double row pin header
qContact
DF 13 - 2630 SCF A
q w e
q Applicable Cable Size 2630: AWG26 to 30 w Packaging Type SCF: Socket Contact/Reel
e Plating Type
Blank: Tin plated A : Gold plated
B184
sSingle Row Socket
[Specific No.] - **, (**) Blank: 1 bag: 100 pcs.
Photo: Contact insertion
Number of Contacts Part Number CL No. A 1.25 2 DF13-2S-1.25C(**) 536-0001-4-** 2.50 3 DF13-3S-1.25C(**) 536-0002-7-** 3.75 4 DF13-4S-1.25C(**) 536-0003-0-** 5.00 5 DF13-5S-1.25C(**) 536-0004-2-** 6.25 6 DF13-6S-1.25C(**) 536-0005-5-** 7.50 7 DF13-7S-1.25C(**) 536-0006-8-** 8.75 8 DF13-8S-1.25C(**) 536-0007-0-** Note 1.The quantity at the specific No. "None" is delivered
B 4.15 5.40 6.65 7.90 9.15 10.40 11.65 per bag
Part Number DF13- 9S-1.25C(**) DF13-10S-1.25C(**) DF13-11S-1.25C(**) DF13-12S-1.25C(**) DF13-14S-1.25C(**) DF13-15S-1.25C(**)
Number of Contacts CL No. 9 536-0008-3-** 10 536-0009-6-** 11 536-0010-5-** 12 536-0011-8-** 14 536-0013-3-** 15 536-0014-6-**
A 10.00 11.25 12.50 13.75 16.25 17.50
Unit: mm B 12.90 14.15 15.40 16.65 19.15 20.40
(100 pcs.). If needed, please select and order the products per bag.
sDouble Row Socket
Photo: Contact insertion state
Unit: mm Part Number DF13-10DS-1.25C(**) DF13-20DS-1.25C(**) DF13-30DS-1.25C(**) DF13-40DS-1.25C(**) Note:The quantity Number of Contacts CL No. 10 536-0550-2-** 20 536-0555-6-** 30 536-0560-6-** 40 536-0565-0-** at the specific No. "Blank" is A B [Specific No.] - **, (**) Blank: 1 bag: 100 pcs. 5.00 10.40 11.25 16.65 17.50 22.90 23.75 29.15 delivered per bag (100pcs). If needed, please select and order the products per bag.
B185
sSingle Row Straight Pin Header (Through hole)
[Specific No.] - **, (**) Blank: Tin plated 20: Tin plated, tube packaging
BTube Dimensions
qBoard Through-hole Diameter:O0.60.03
Number of Contacts Part Number CL No. A 1.25 2 DF13-2P-1.25DSA(**) 536-0101-9-** 2.50 3 DF13-3P-1.25DSA(**) 536-0102-1-** 3.75 4 DF13-4P-1.25DSA(**) 536-0103-4-** 5.00 5 DF13-5P-1.25DSA(**) 536-0104-7-** 6.25 6 DF13-6P-1.25DSA(**) 536-0105-0-** 7.50 7 DF13-7P-1.25DSA(**) 536-0106-2-** 8.75 8 DF13-8P-1.25DSA(**) 536-0107-5-** Note 1.The quantity at the specific No. "None" is delivered
B 4.15 5.40 6.65 7.90 9.15 10.40 11.65 per bag
Number of Contacts Part Number CL No. A 10.00 9 DF13- 9P-1.25DSA(**) 536-0108-8-** 11.25 10 DF13-10P-1.25DSA(**) 536-0109-0-** 12.50 11 DF13-11P-1.25DSA(**) 536-0110-0-** 13.75 12 DF13-12P-1.25DSA(**) 536-0111-2-** 15.00 13 DF13-13P-1.25DSA(**) 536-0112-5-** 16.25 14 DF13-14P-1.25DSA(**) 536-0113-8-** 17.50 15 DF13-15P-1.25DSA(**) 536-0114-0-** (100 pcs.). If needed, please select and order the products
Unit: mm B 12.90 14.15 15.40 16.65 17.90 19.15 20.40 per bag.
sSingle Row Right Angle Pin Header (Through hole)
[Specific No.] - **, (***) (20): Tin plated tube packaging
BTube Dimensions
qBoard Through-hole Diameter:O0.60.03
Number of Contacts A Part Number CL No. B Tube Packaging Quantity Part Number 1.25 4.15 115 2 DF13-2P-1.25DS(**) 536-0151-7-** DF13- 9P-1.25DS(**) 2.50 5.40 89 3 DF13-3P-1.25DS(**) 536-0152-0-** DF13-10P-1.25DS(**) 3.75 6.65 72 4 DF13-4P-1.25DS(**) 536-0153-2-** DF13-11P-1.25DS(**) 5.00 7.90 61 5 DF13-5P-1.25DS(**) 536-0154-5-** DF13-12P-1.25DS(**) 6.25 9.15 52 6 DF13-6P-1.25DS(**) 536-0155-8-** DF13-14P-1.25DS(**) 7.50 10.40 46 7 DF13-7P-1.25DS(**) 536-0156-0-** DF13-15P-1.25DS(**) 8.75 11.65 41 8 DF13-8P-1.25DS(**) 536-0157-3-** Note 1.Order the tube packaging product, multiplying the tube packaging quantity.
Unit: mm Number of Contacts A CL No. B Tube Packaging Quantity 37 9 10.00 12.90 536-0158-6-** 34 10 11.25 14.15 536-0159-9-** 31 11 12.50 15.40 536-0160-8-** 29 12 13.75 16.65 536-0161-0-** 25 14 16.25 19.15 536-0163-6-** 23 15 17.50 20.40 536-0164-9-**
B186
BSingle Row Straight Pin Header (SMT)
[Specific No.] - **, (**) (20): Tin plated tube package (50): Gold plated tube package
This pin header is a box type style. Therefore, the header has neither vacuum absorption face nor embossed tape packaging specification. Unit: mm Part Number DF13- 2P-1.25V(**) DF13- 3P-1.25V(**) DF13- 4P-1.25V(**) DF13- 5P-1.25V(**) DF13- 6P-1.25V(**) DF13- 7P-1.25V(**) DF13- 8P-1.25V(**) DF13- 9P-1.25V(**) DF13-10P-1.25V(**) DF13-11P-1.25V(**) DF13-12P-1.25V(**) DF13-14P-1.25V(**) DF13-15P-1.25V(**) CL No. 536-0201-3-** 536-0202-6-** 536-0203-9-** 536-0204-1-** 536-0205-4-** 536-0206-7-** 536-0207-0-** 536-0208-2-** 536-0209-5-** 536-0210-4-** 536-0211-7-** 536-0213-2-** 536-0214-5-** Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 14 15 A 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 13.75 16.25 17.50 B 4.15 5.40 6.65 7.90 9.15 10.40 11.65 12.90 14.15 15.40 16.65 19.15 20.40 C 7.15 8.40 9.65 10.90 12.15 13.40 14.65 15.90 17.15 18.40 19.65 22.15 23.40 D 3.35 4.60 5.85 7.10 8.35 9.60 10.85 12.10 13.35 14.60 15.85 18.35 19.60 E 5.65 6.90 8.15 9.40 10.65 11.90 13.15 14.40 15.65 16.90 18.15 20.65 21.90 F Tube Package Quantity 1.95 67 3.20 57 4.45 49 5.70 44 6.95 39 8.20 36 9.45 33 10.70 30 11.95 28 13.20 26 14.45 24 16.95 21 18.20 20 Remark
Guide post
Note:Please order the tube packaging products, multiplying the tube packaging quantity.
BPCB mounting pattern
BTube Dimensions
Note:If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact.
B187
sSingle Row Straight Pin Header (SMT) s(Three-Wall/Correspond to Vacuum Absorption) BPCB mounting pattern
Note 1.This hole isn't needed for "No guide post". Note 2.If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact.
[Specific No.] - **, (**) (20): Tin plated tube packaging (21): Tin plated embossed tape packaging (50): Gold plated tube packaging (51): Gold plated embossed tape packaging
Unit: mm Part Number DF13B- 2P-1.25V(**) DF13B- 3P-1.25V(**) DF13B- 4P-1.25V(**) DF13B- 5P-1.25V(**) DF13B- 6P-1.25V(**) DF13B- 7P-1.25V(**) DF13B- 8P-1.25V(**) DF13B- 9P-1.25V(**) DF13B-10P-1.25V(**) DF13B-11P-1.25V(**) DF13B-12P-1.25V(**) DF13B-14P-1.25V(**) DF13B-15P-1.25V(**) DF13C- 2P-1.25V(**) DF13C- 3P-1.25V(**) DF13C- 4P-1.25V(**) DF13C- 5P-1.25V(**) DF13C- 6P-1.25V(**) DF13C- 7P-1.25V(**) DF13C- 8P-1.25V(**) DF13C- 9P-1.25V(**) DF13C-10P-1.25V(**) DF13C-11P-1.25V(**) DF13C-12P-1.25V(**) DF13C-14P-1.25V(**) DF13C-15P-1.25V(**) Note 1.Please order Note 2.Please order CL No. 536-0051-2-** 536-0052-5-** 536-0053-8-** 536-0054-0-** 536-0055-3-** 536-0056-6-** 536-0057-9-** 536-0058-1-** 536-0059-4-** 536-0060-3-** 536-0061-6-** 536-0063-1-** 536-0064-4-** Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 14 15 A 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 13.75 16.25 17.50 B 4.15 5.40 6.65 7.90 9.15 10.40 11.65 12.90 14.15 15.40 16.65 19.15 20.40 C 7.15 8.40 9.65 10.90 12.15 13.40 14.65 15.90 17.15 18.40 19.65 22.15 23.40 D 3.35 4.60 5.85 7.10 8.35 9.60 10.85 12.10 13.35 14.60 15.85 18.35 19.60 E 5.65 6.90 8.15 9.40 10.65 11.90 13.15 14.40 15.65 16.90 18.15 20.65 21.90 F 1.95 3.20 4.45 5.70 6.95 8.20 9.45 10.70 11.95 13.20 14.45 16.95 18.20 G 2.20 3.45 3.10 4.35 5.60 6.85 8.10 9.35 10.60 11.85 13.10 15.60 16.85 2.20 3.45 3.10 4.35 5.60 6.85 8.10 9.35 10.60 11.85 13.10 15.60 16.85 Tube Packaging Quantity 67pcs 57 49 44 39 36 33 30 28 26 24 21 20 67pcs 57 49 44 39 36 33 30 28 26 24 21 20 Emboss Width 16 16 24 24 24 24 24 24 24 32 32 32 44 16 16 24 24 24 24 24 24 24 32 32 32 44 Remarks
With boss
- 1.25 4.15 7.15 2 5.65 1.95 536-0401-2-** - 2.50 5.40 8.40 3 6.90 3.20 536-0402-5-** - 3.75 6.65 9.65 4 8.15 4.45 536-0403-8-** - 5.00 7.90 10.90 5 9.40 5.70 536-0404-0-** - 6.25 9.15 12.15 6 10.65 6.95 536-0405-3-** - 7.50 10.40 13.40 7 11.90 8.20 536-0406-6-** - 8.75 11.65 14.65 8 13.15 9.45 536-0407-9-** - 10.00 12.90 15.90 9 14.40 10.70 536-0408-1-** - 11.25 14.15 17.15 10 15.65 11.95 536-0409-4-** - 12.50 15.40 18.40 11 16.90 13.20 536-0410-3-** - 13.75 16.65 19.65 12 18.15 14.45 536-0411-6-** - 16.25 19.15 22.15 14 20.65 16.95 536-0413-1-** - 17.50 20.40 23.40 15 21.90 18.20 536-0414-4-** the tube packaging product, multiplying the tube packaging quantity. the embossed tape packaging product according to reel number. (1000
Without boss
pcs. per reel)
B188
sSingle Row Right Angle Pin Header (SMT) s(Four-Wall/Correspond to Emboss Absorption) BPCB mounting pattern
BTube Dimensions
[Specific No.] - **, (**) (20): Tin plated tube packaging (21): Tin plated embossed tape packaging (50): Gold plated tube packaging (51): Gold plated embossed tape packaging
Unit: mm Part Number DF13- 2P-1.25H(**) DF13- 3P-1.25H(**) DF13- 4P-1.25H(**) DF13- 5P-1.25H(**) DF13- 6P-1.25H(**) DF13- 7P-1.25H(**) DF13- 8P-1.25H(**) DF13- 9P-1.25H(**) DF13-10P-1.25H(**) DF13-11P-1.25H(**) DF13-12P-1.25H(**) DF13-14P-1.25H(**) DF13-15P-1.25H(**) DF13A- 2P-1.25H(**) DF13A- 3P-1.25H(**) DF13A- 4P-1.25H(**) DF13A- 5P-1.25H(**) DF13A- 6P-1.25H(**) DF13A- 7P-1.25H(**) DF13A- 8P-1.25H(**) DF13A- 9P-1.25H(**) DF13A-10P-1.25H(**) DF13A-11P-1.25H(**) DF13A-12P-1.25H(**) DF13A-14P-1.25H(**) DF13A-15P-1.25H(**) Note 1.Please order Note 2.Please order CL No. 536-0251-1-** 536-0252-4-** 536-0253-7-** 536-0254-0-** 536-0255-2-** 536-0256-5-** 536-0257-8-** 536-0258-0-** 536-0259-3-** 536-0260-2-** 536-0261-5-** 536-0263-0-** 536-0264-3-** Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 14 15 A 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 13.75 16.25 17.50 B 4.15 5.40 6.65 7.90 9.15 10.40 11.65 12.90 14.15 15.40 16.65 19.15 20.40 C 7.15 8.40 9.65 10.90 12.15 13.40 14.65 15.90 17.15 18.40 19.65 22.15 23.40 D 3.35 4.60 5.85 7.10 8.35 9.60 10.85 12.10 13.35 14.60 15.85 18.35 19.60 E 5.65 6.90 8.15 9.40 10.65 11.90 13.15 14.40 15.65 16.90 18.15 20.65 21.90 Tube Packaging Quantity 67pcs 57 49 44 39 36 33 30 28 26 24 21 20 Emboss Width 16 16 24 24 24 24 24 24 24 32 32 32 44 16 16 24 24 24 24 24 24 24 32 32 32 44 Remarks
With boss
- 1.25 4.15 7.15 2 5.65 67pcs 536-0301-8-** - 2.50 5.40 8.40 3 6.90 57 536-0302-0-** - 3.75 6.65 9.65 4 8.15 49 536-0303-3-** - 5.00 7.90 10.90 5 9.40 44 536-0304-6-** - 6.25 9.15 12.15 6 10.65 39 536-0305-9-** - 7.50 10.40 13.40 7 11.90 36 536-0306-1-** - 8.75 11.65 14.65 8 13.15 33 536-0307-4-** - 10.00 12.90 15.90 9 14.40 30 536-0308-7-** - 11.25 14.15 17.15 10 15.65 28 536-0309-0-** - 12.50 15.40 18.40 11 16.90 26 536-0310-9-** - 13.75 16.65 19.65 12 18.15 24 536-0311-1-** - 16.25 19.15 22.15 14 20.65 21 536-0313-7-** - 17.50 20.40 23.40 15 21.90 20 536-0314-0-** the tube packaging product, multiplying the tube packaging quantity. the embossed tape packaging product according to reel number. (1000 pcs. per reel)
Without boss
B189
sDouble Row Straight Pin Header (SMT) s(Four-Wall Type Compliant to Emboss Absorption)
BPCB mounting pattern
BTube Dimensions
Note 1.If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact.
Note 2.The hole isn't needed at "Without boss".
[Specific No.] - **, (**) (20): Tin plated tube packaging (29): Tin plated embossed tape packaging (50): Gold plated tube packaging (59): Gold plated embossed tape packaging Unit: mm
Number of Part Number CL No. Contacts 10 20 30 40 10 20 30 40 A 12.1 B 5 C 8.7 D 7.5 20 - - - - DF13A-10DP-1.25V(**) 536-0510-8-** DF13A-20DP-1.25V(**) 536-0515-1-** DF13A-30DP-1.25V(**) 536-0520-1-** DF13A-40DP-1.25V(**) 536-0525-5-** DF13A-10DP-1.25V(**) 536-0600-9-** DF13A-20DP-1.25V(**) 536-0605-2-** DF13A-30DP-1.25V(**) 536-0610-2-** DF13A-40DP-1.25V(**) 536-0615-6-**
Specification Specification Specification Specification Tube Package Emboss (20) K K - - K K - - (29) K K - - K K - - (50) K K K K K K K K (59) K K K K K K K K Quantity 40 pcs 26 19 15 40 26 19 15 Width 24 32 44 44 24 32 44 44 Without boss With boss Remarks
18.35 11.25 14.95 13.75 24.6 17.5 21.2 12.1 5 8.7 30.85 23.75 27.45 26.25 18.35 11.25 14.95 24.6 17.5 21.2 30.85 23.75 27.45
Note 1.Please order the tube packaging product, multiplying the tube packaging quantity. Note 2.Please order the embossed tape packaging product according to reel number. (1 reel: 1000 pcs.) Note 3.The absorption cap is attached to the embossed tape packaging product.
B190
sCrimping Contact
Part Number DF13-2630SCF DF13-2630SCFA CL No. 536-0300-5 536-0298-5 Packaging Type Reel Reel Quantity 10,000 10,000 Finish Tin plating Gold plating
qApplicable Cable (Tin Plating Annealed Copper Wire)
Conductor Size (Wire construction) Jacket Diameter AWG26(7 cores./0.16mm) AWG28(7 cores./0.127mm) O0.65 to O1.0mm AWG30(7 cores./0.1mm) Note:If other cables are used instead of the applicable cable, please contact the Hirose sales department.
qRecommended Cable
UL1571
qStrip Length
1.2 to 1.9mm
BApplicable Crimping Tool
Type Part Number CL No. Applicable Contact Applicator AP105-DF13-2630S 901-4531-9 DF13-2630SCF/SCFA Press Main Unit CM-105 901-0005-4 -------------Manual Crimping Tool DF13-TB2630HC 550-0256-1 DF13-2630SCF Extraction Tool DF-C-PO(B) 550-0179-2 DF13-2630SCF Note 1.If a trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any product. Note 2.The manual crimping tool is used to sequentially cut the reel contact with carrier.
BApplication Pattern
SMT (Single Row Product) Through hole (Single Row Product) SMT (Double Row Product)
Straight
Right Angle
B191
BEmbossed Carrier Tape Dimensions
KDF13B-*P-1.25V With boss KDF13C-*P-1.25V Without boss
KDF13-*P-1.25H KDF13A-*P-1.25H
Unit: mm Product Type DF13B-*P-1.25V DF13C-*P-1.25V DF13-*P-1.25H DF13A-*P-1.25H Note:The 13 contacts is not serialized. Number of Contacts 2, 3 4 to 90 10 to 14 15 A 16 24 32 44 B ------- ------- 28.4 40.4 C 7.5 11.5 14.2 20.2 D 16.4 24.4 32.4 44.4
B192
BPrecautions
1. Recommended Temperature Profile (SMT)
Note 1.This process is allowed up to twice under the same condition. However, the interval between the first and second processes must be maintained at the room temperature. Note 2.The temperature indicates the board surface temperature in the connector lead area. 2. Recommended Soldering Condition (SMT) 3. Recommended Screen Thickness (SMT) 4. Board Warpage (SMT) 5. Recommended Soldering 5. Condition (Through hole) 6. Cleaning Condition 7. Connection Condition Max 0.03mm in the connector center area, based on both connector edges
Manual soldering: 290c for 2 seconds
0.15 to 0.2mm
Flow: 250c for 3 seconds Manual soldering: 290c for 2 seconds
Refer to Nylon Connector Use Hand book. Refer to Nylon Connector Use Hand book. sCarefully carry out the crimping operation according to "Crimping Condition Sheet" and "Crimping Quality Standard", because the crimping contact is an extremely small style.
8. Cautions
sBe careful for the excessive scoop insertion/extraction, which will cause damage to the product.
B193

▲Up To Search▲

Price & Availability of DF13C-11S-125V

	To Download DF13C-11S-125V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .